RedwingRC Accessories

BLS-125AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Single wire to connect directly to RX) 126.5kg/1757.1oz .15sec @8.4V

Ask a question about this product

Printable version

Options

Our Price:

$199.99

Quantity (10)

Details


Availability	10 in stock
Weight	0.80 lbs
SKU	BBR-BLS-125AWB-single wire
Manufacturer	Blue Bird

Pre-order now to reserve one in the first shippment arriving late Jan 2025!

BLS-125AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Single wire to connect directly to RX) 126.5kg/1757.1oz .15sec @8.4V--Blue Bird's most powerful 1/4-1/5 scale Monster Truck/Crawler/Large Boat servo at over 1750oz!!

Water Proof IP67 (Ingress Protection Rating, 6=Dust Tight, 7=Immersion up to 1Mfor 30 min)

Application / Suitable

1/4、1/5th Scale Vehicles, such as Buggy ( Off-Road ), GT ( On-road ), Monster Truck, Rock Crawler & Large Boats, etc.

Specifications

Stall Torque At 6.6V	99.5 kg-cm / 1382.1 oz-in
Stall Torque At 7.4V	111.4 kg-cm / 1547.3 oz-in
Stall Torque At 8.4V	126.5 kg-cm / 1757.1 oz-in
No-load Speed At 6.0V	0.19 sec / 60°
No-load Speed At 7.4V	0.17 sec / 60°
No-load Speed At 8.4V	0.15 sec / 60°
Stall Current At 6.0V	11.7 Amp
Stall Current At 7.4V	13.5 Amp
Stall Current At 8.4V	15.4 Amp

Protection Mechanism

Soft Start Protection	Soft start back to a neutral position.
Over Voltage Protection	Over 9.0V drive the protection mode, and 8.7V return to normal mode.
Low Voltage Protection	Lower than 5.8V, drive the protection mode, and 6.0V return to normal mode.
Locked Rotor Protection	Stall in 3 sec, output torque goes down.
Temperature Protection	Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.
Lose Control Protection	When losing the transmitter signal, that servo will immediately be back to the neutral position and locked.

Power Supply

Operating Voltage Range	6.0V ~ 8.7V ( 2S Li-Fe / 2S Li-Poly HV )
Operating Temperature Range	-20°C ~ +60°C ( -4°F ~ +140°F )

Control Specification

Control System	Higher-order Algorithm of【STMicroelectronics】32-bit MCU AD 12-bit Resolution ( 4096 Steps ) Frequency：Up to 400Hz & 1500us or 1520us
Frame Rate (Signal repeat rate)	Under 1ms【Auto-adaptive with Futaba_UR/SR & Sanwa_SXR & KO_HCS Mode】
Dead Band Width	0.002ms ( Default：2us)

Mechanical Specifications

Ball Bearing	Dual, Stronger Ball Bearings with 1 piece of oil seal.【NMB from Japan】
Gear	Stainless Steel Output Gear With All Steel Gears
Motor	High-Efficiency Brushless Motor
Outside Case	Full Aluminum Alloy Case
Horn / Gear Spline	15 Teeth ( Universal Type )
Connected Cable Length	300 mm (11.81 in) TYU : Black w/ Gray
Connected Housing	Universal Connector [ Black ]
Ingress Protection Rating	IP67 means: 6=Dust Tight / 7=Immersion up to 1 Meter depth of 30 minutes

Physical Specifications

Dimension (mm)	65.8 x 30 x 56.5 mm / 2.59 x 1.18 x 2.22 in
Weight (gram)	229.0 ± 1 grams / 8.08 oz W/O Cable
Product Picture / Dimension Sketch

Includes Servo and Aluminum Servo Arm

FUTABA S148 Standard Servo .22sec/41.6oz @ 6V

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

Features

Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
4096 Resolution
Improved Latency (Dual Processor 7ms Frame Rate)
Vibration Mode
Included Touch Screen Stylus
Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
Customizable Menu
One-Stop Model Type Setting
3 Multi-Tasking Digital Trims
Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
Ultra-Smooth Quad Ball Bearing Gimbals
Full-Size Comfortable Hand Grips (Top Quality Elastomer)
Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
Easy Gimbal Mode Change and Tension Adjustment (Hardware)
Power Management System (Adjustable Backlight & Auto Shut-off Time)
Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)