RedwingRC Accessories

BLS-125AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Single wire to connect directly to RX) 126.5kg/1757.1oz .15sec @8.4V

Ask a question about this product

Printable version

Options

Our Price:

$199.99

Quantity (10)

Details


Availability	10 in stock
Weight	0.80 lbs
SKU	BBR-BLS-125AWB-single wire
Manufacturer	Blue Bird

Pre-order now to reserve one in the first shippment arriving late Jan 2025!

BLS-125AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Single wire to connect directly to RX) 126.5kg/1757.1oz .15sec @8.4V--Blue Bird's most powerful 1/4-1/5 scale Monster Truck/Crawler/Large Boat servo at over 1750oz!!

Water Proof IP67 (Ingress Protection Rating, 6=Dust Tight, 7=Immersion up to 1Mfor 30 min)

Application / Suitable

1/4、1/5th Scale Vehicles, such as Buggy ( Off-Road ), GT ( On-road ), Monster Truck, Rock Crawler & Large Boats, etc.

Specifications

Stall Torque At 6.6V	99.5 kg-cm / 1382.1 oz-in
Stall Torque At 7.4V	111.4 kg-cm / 1547.3 oz-in
Stall Torque At 8.4V	126.5 kg-cm / 1757.1 oz-in
No-load Speed At 6.0V	0.19 sec / 60°
No-load Speed At 7.4V	0.17 sec / 60°
No-load Speed At 8.4V	0.15 sec / 60°
Stall Current At 6.0V	11.7 Amp
Stall Current At 7.4V	13.5 Amp
Stall Current At 8.4V	15.4 Amp

Protection Mechanism

Soft Start Protection	Soft start back to a neutral position.
Over Voltage Protection	Over 9.0V drive the protection mode, and 8.7V return to normal mode.
Low Voltage Protection	Lower than 5.8V, drive the protection mode, and 6.0V return to normal mode.
Locked Rotor Protection	Stall in 3 sec, output torque goes down.
Temperature Protection	Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.
Lose Control Protection	When losing the transmitter signal, that servo will immediately be back to the neutral position and locked.

Power Supply

Operating Voltage Range	6.0V ~ 8.7V ( 2S Li-Fe / 2S Li-Poly HV )
Operating Temperature Range	-20°C ~ +60°C ( -4°F ~ +140°F )

Control Specification

Control System	Higher-order Algorithm of【STMicroelectronics】32-bit MCU AD 12-bit Resolution ( 4096 Steps ) Frequency：Up to 400Hz & 1500us or 1520us
Frame Rate (Signal repeat rate)	Under 1ms【Auto-adaptive with Futaba_UR/SR & Sanwa_SXR & KO_HCS Mode】
Dead Band Width	0.002ms ( Default：2us)

Mechanical Specifications

Ball Bearing	Dual, Stronger Ball Bearings with 1 piece of oil seal.【NMB from Japan】
Gear	Stainless Steel Output Gear With All Steel Gears
Motor	High-Efficiency Brushless Motor
Outside Case	Full Aluminum Alloy Case
Horn / Gear Spline	15 Teeth ( Universal Type )
Connected Cable Length	300 mm (11.81 in) TYU : Black w/ Gray
Connected Housing	Universal Connector [ Black ]
Ingress Protection Rating	IP67 means: 6=Dust Tight / 7=Immersion up to 1 Meter depth of 30 minutes

Physical Specifications

Dimension (mm)	65.8 x 30 x 56.5 mm / 2.59 x 1.18 x 2.22 in
Weight (gram)	229.0 ± 1 grams / 8.08 oz W/O Cable
Product Picture / Dimension Sketch

Includes Servo and Aluminum Servo Arm

Servo Extensions 22AWG and 20AWG

High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).

Soft flexible silicone casing
Heavy duty 22awg
Universal - XQ Power/Hitec/Power HD/JR/more...
Reliable! We've NEVER gotten a pair returned

Prices
- 2" 1 pair - $2.50
- 2" 2 pair - $4.50
- 2" 3 pair - $6.99
- 3" 1 pair - $3.50
- 3" 2 pair - $6.50
- 3" 3 pair - $8.99
- 6" 1 pair - $3.99
- 6" 2 pair - $6.99
- 6" 3 pair - $9.99
- 8" 1 pair - $3.99
- 8" 2 pair - $6.99
- 8" 3 pair - $9.99
- 10" 1 pair - $3.99
- 10" 2 pair - $6.99
- 10" 3 pair - $9.99
- 12" 1 pair - $4.99
- 12" 2 pair - $8.99
- 12" 3 pair - $12.99
- 14" 1 pair - $4.99
- 14" 2 pair - $8.99
- 14" 3 pair - $12.99
- 16" 1 pair - $4.99
- 16" 2 pair - $8.99
- 16" 3 pair - $12.99
- 18" 1 pair - $6.99
- 18" 2 pair - $10.99
- 18" 3 pair - $13.99
- 24" 1 pair - $7.99
- 24" 2 pair - $12.99
- 24" 3 pair - $15.99
- 28" 1 pair - $7.99
- 28" 2 pair - $12.99
- 28" 3 pair - $15.99
- 32" 1 pair - $7.99
- 32" 2 pair - $12.99
- 32" 3 pair - $15.99
- 36" 1 pair - $8.99
- 36" 2 pair - $14.99
- 36" 3 pair - $17.99
- 44" 1 pair - $8.99
- 44" 2 pair - $14.99
- 44" 3 pair - $17.99
- 48" 1 pair - $8.99
- 48" 2 pair - $14.99
- 48" 3 pair - $17.99

$2.50 2.50

Bob Smith Industries 303 Extra-Long Extender Tips Multi-Use for CAs

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option. Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water. The natural shedding of the skin’s outer layer will remove any residual CA within 12 hr. For removing CA from hard surfaces, soak a cloth or paper towel in Un-Cure™ and rub areas vigorously. Un-Cure™, however, will mar most plastics.