BMS-M15S No Tabs Servo, HV-Digital, Magnetic Sensor, Micro, High Torque, Metal Gear, Coreless

Contact UsCustomer Reviews

BMS-M15S No Tabs Servo, HV-Digital, Magnetic Sensor, Micro, High Torque, Metal Gear, Coreless

Our Price:

$57.99


Quantity (10)

Availability 10 in stock
Weight 0.10 lbs
SKU BBR-BMS-M15S
Manufacturer Blue Bird

BMS-M15S No Tabs Servo, HV-Digital, Magnetic Sensor, Micro, High Torque, Metal Gear, Coreless servo

The Blue Bird BMS-M15S servo is a ground-breaking new servo from Bluebird, perfect for the F5J market and many other sailplane/glider applications. It uses a magnetic contactless position sensor which will never wear out and thus removes the major failure mode of my most RC servos. Similiar in size to the 115HV, the M15S features an all metal case without any mounting lugs. This servo is usually mountes by bonding it with epoxy glue to the model's structure.

Despite being only 10 mm thick the M15S’s torque and speed are both very high making it suitable for all control surfaces on fast gliders and jets. The voltage range goes from 4.5V up to 8.5V, making it perfect for use from electronic speed controls (ESC), 4.8V NiMH or 2S Lipo batteries. The high-quality metal gears are supported on two ball bearings and the servo is driven by a high-quality coreless DC motor. The black case is anodised aircraft grade aluminium alloy, not plastic.

The large output spline is identical to Futaba 25 tooth splines, so replacement output arms are readily available.

 

APPLICATION / SUITABLE
3D EP Aircraft, F5J, F3K, F3P & DLG, HLG.
SPECIFICATIONS
Torque At 6.0V 5.1 kg-cm / 70.8 oz-in
Torque At 7.4V 6.4 kg-cm / 88.9 oz-in
Torque At 8.4V 7.5 kg-cm / 104.2 oz-in
Speed At 6.0V 0.14 sec / 60°
Speed At 7.4V 0.11 sec / 60°
Speed At 8.4V 0.10 sec / 60°


POWER SUPPLY

Operating Voltage Range  4.5V ~ 8.5V 4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S Li-Poly / 2S Li-Fe )

 

MICRO SERVO
Control System Digital Controller 12-Bits 12-Bits 12-Bits ( ( 4096 4096 Steps Steps ) ) Working Frequency & Neutral 333 Hz / 1520us
Dead Band Width 0.001ms (1us)
Frame Rate (Signal repeat rate) 3ms ( Maximum ) [ EX:Futaba-4PX / Sanwa-M12 ]
Rotating Direction Clockwise / When Pulse Traveling 1500 ~ 1900u sec
Operating Travel 90° (When 1100 ~ 1900 μ sec) [ Maximum..900us ~ 2100us ]

 

MECHANICAL SPECIFICATIONS
Ball Bearing 2 Ball Bearing
Gear All Metal Gears
Motor Coreless Motor
Horn / Gear Spline 25 Teeth ( Same as F-Type )
Cable Length 140 mm ( 5.5 in )
Connector Universal Connector ( J-Type )

 

PHYSICAL SPECIFICATIONS
Dimension (mm) 23.2 x 10 x 24.3 mm / 0.91 x 0.39 x 0.96 in
Weight (gram) 12.0 ± 0.5 grams / 0.42 oz​

 

: *
: *
: *
 

KST X10 Mini Wing Servo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Ever go to a restaurant and look at the menu and think to yourself - "there's so many options that all just look so good!" - and have trouble deciding? Well here at Redwing RC our awesome servo collection is very similar! We have a great variety of spectacular servos to choose from so there is something for everyone! But let's introduce yet another great option to consider --

This is the Xpert AS-6501-HV A2 Standard Size Aluminum Servo.

Torque

– @8.4V: 348.94 oz-in/ @8.4V: 25.14 kg-cm

– @7.4V: 304.95 oz-in/@7.4V:21.97 kg-cm

Speed

– @8.4V: .096 sec/45°

– @7.4V: .104 sec/45°

Dimensions: 40x20x37.8mm

Weight: 71g

Matching Gear Set: XGS73780

 

GET YOURS TODAY!

PRS-X10-MINI

$45.00

NEW

SmoothFlite 16 ML

Special Order item allow 3-4 weeks for delivery

SmoothFlite 16

Welcome to the world’s first Automatic Intelligent Servo Matching System (ISMS)

Intellimatch is the result of 2 years of research and development, is designed to take the worry out of servo matching and gives you the maximum power, smoothest response and increased life from your servos.

If you have built giant scale models before with multi servo control surfaces then I am sure you will be familiar with the process of manually matching the servos. You generally match servos on 2 end points and maybe a center point. That’s a total of only 3 matching points. There is no way 3 points will accurately match your servos. Also, you have to adjust each servo until minimal buzz is heard or you might use an ammeter to minimize current draw. Throw that idea away...

With the Booma RC Intellimatch you say goodbye to traditional methods of servo matching. The Intellimatch system automatically matches servos on 100 points through the servo sweep range. That is 100 points not just the traditional 2 or 3. Intellimatch further adds smoother operation by reading the closest 2 points from the servos current position and then interpolates between the 2 selected points to a resolution of 8192 steps. 8192 step resolution is the highest resolution available today.

The IM14 Intellimatch unit is designed to match 1 set of up to 4 servos. An example IM14 usage might be up to 4 rudder or ailerons servos

Read on for the full list of features




Model Example 1 - 100cc Scale Aero Model:

-2 Aileron Servos per aileron

-1 Elevator Servo per elevator

-2 Rudder servos

Suggested Power Bus Intellimatch Accessories

-2 x IM22 = 1 x IM22 for Ailerons and 1 x IM22 for Elevators

Model Example 2 - 150cc Scale Aero Model:

-3 Aileron Servos per aileron

-2 Elevator Servo per elevator

-3 Rudder servos

Suggested Power Bus Intellimatch Accessories:

-1 x IM22 = 1 x IM22 for Elevators

-2 x IM14 = for Ailerons

-1 x IM14 = for Rudder

Model Example 3 - Large Jet:

-2 Aileron Servos per aileron

-2 Flap Servos

-1 Elevator Servo per elevator

-2 Rudder servos

Suggested Power Bus Intellimatch Accessories:

-1 x IM22 = for right side Ailerons and Flaps

-1 x IM22 = for left side Ailerons and Flaps

-1 x IM22 = for Rudder

 

 

Specs:

 

 

  • 32 bit Processor for the highest speed and resolution in the industry
  • Automatic matching of up to 4 servos on a single channel
  • 100 matched point across the servo sweep range
  • 82 step real time interpolation between the 100 matched points
  • PWM resolution of up to 8200 steps
  • Dual LED indication for programming feedback
  • Recommended battery chemistry - Life (2 cells), LiPo (2 cells), Lion (2 cells), NiCd(5cells),Nimh(5 cells)
  • Maximum input voltage 10 volts
  • Minimum input voltage 5 volts
  • Compatible with all receivers and Power Distribution systems
  • Works with Advanced Radio AR1232 and AR824. Also compatible with all other receiver and Power Distribution systems
  • Dual fail safe arming with the supplied arming plug
  • On board Flash storage - 100 year data retention
  • Weight is only 12 grams
  • Dimensions 49mm x 23mm (3.5 x 2.5 inches)

 

Custom Upgrades can be ordered (typically 3-4 weeks) 
Power Switch option:
Standard Pin and Flag Switch, or for a slight cost can upgrade to a Remote Switch or Magnetic Switch 

 

BRC-875

$339.00

FUTABA S3071HV S.Bus High Voltage Standard Airplane Servo .17sec/145.9oz @ 7.4V (CLONE) (CLONE)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)


  •  

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

HRP-FUT01102222-3 11

$58.99