RedwingRC Accessories

HiTec HS-5087MH HV Digital MG Micro Servo, .13sec/60oz @ 7.4v

Ask a question about this product

Printable version

Options

Market Price: $55.99

Our Price:

$39.99

You Save

29%

Quantity (7)

Details


Availability	7 in stock
Weight	0.35 lbs
SKU	HRC-35087S
Manufacturer	Hitec

HS-5087MH High Voltage Premium Digital Metal Gear Micro Servo, .13sec/60oz @ 7.4v

The HS-5087MH digital, metal gear micro servo is the high voltage and built with a 3-pole ferrite motor and heavy-duty metal gears, this servo will bring maximum performance to your hobby and deliver extra power with a 2-cell 7.4V LiPo battery. Whether you are a beginner or an expert in the RC field, our HS-5087MH will provide the strength and capability you need and want in a micro servo. Drivers will find it the perfect steering servo for their 1/16th scale vehicles. Pilots with .15 to .40-size glow and electric aircraft will relish in its power and reliability. Its precision and performance also make it perfect for 500-size helicopters.

Features:

Our Smallest 7.4v 2-Cell LiPo Capable Servo
Rugged Metal Gears
Ball Bearing-Supported Output Shaft
Standard Programmable Digital Circuit for More Holding Power
Standard Servo Performance in a Micro Package

Dimensions	1.14" x 0.51"x 1.18" (29 x 13 x 30mm)
Product Weight	0.77oz (21.9g)
Output Shaft Style	24 tooth (C1) spline
Voltage Range	6.0V - 7.4V
No-Load Speed (6.0V)	0.17sec/60°
No-Load Speed (7.4V)	0.13sec/60°
Stall Torque (4.8V)	50oz/in. (3.6kg.cm)
Stall Torque (6.0V)	60oz/in. (4.3kg.cm)
Max PWM Signal Range (Standard)	750-2250μsec
Travel per µs (out of box)	.089°/μsec
Travel per µs (reprogrammed normal res)	.118°/μsec
Max Travel (out of box)	133°
Max Travel (reprogrammed normal res)	177.5°
Pulse Amplitude	3-5V
Operating Temperature	-20°C to +60°C
Continuous Rotation Modifiable	Yes
Direction w/ Increasing PWM Signal	Clockwise
Deadband Width	2µs
Motor Type	3 Pole Ferrite
Feedback Style	5KΩ Potentiometer
Output Shaft Support	Top Ball Bearing
Gear Type	Straight Cut Spur
Gear Material	Metal
Wire Length	7" (178mm)
Wire Gauge	28AWG

Z-Poxy 5 Minute Epoxy 4 oz. Set

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

Works Best On:

Rubber
White Foam

Works Good On:

Balsa Wood
Soft Wood
Hard Wood
Glass & Metal
Fiberglass
Ceramics
Hard Plastics
Laminating
Water-Resistant
Reinforcing
CA Hinges

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

Click to Download Safety Data Sheet

PAAPT-37

$11.99 11.99

PULSE LIPO 4000mAh 2S 7.4V - For DX7S/DX8/DX9 TX - LiPo Battery

Description:

Pulse Lithium Polymer Batteries - Setting a New Standard.

As Lithium Polymer battery technology continues to push new boundaries, Pulse Lithium Polymer Batteries bring a whole new element into the mix - power & performance at a price that simply can't be ignored.

Designed specifically for the demands of the latest power plants, not to mention the new realm of extreme 3D flight, Pulse brings a whole new battery to bear at a cost never seen before. Simply put, premium power no longer comes at a premium price.

Incorporating the latest advancements in Lithium Polymer technology, Pulse Batteries are designed to bring performance levels to a new stratosphere with 35C, 45C, and 65C battery packs in multiple capacities for the helicopter of your choice. Add the 5C charge rates, and the fun just begins.

Pulse Lithium Polymer Batteries - Can You Feel Your Pulse Quicken?